The Best 5-Day Strength Workout Split for Advanced Lifters
Advanced strength training on 5 days mirrors the structure used by most national-level powerlifters: squat Monday, bench Tuesday, deadlift Thursday, upper accessory Friday, and a light technique/recovery session on Wednesday or Saturday. Intensities range from 65% (technique) to 95%+ (peak days). Mike Tuchscherer's RTS (Reactive Training Systems) system governs load selection via RPE: top sets at RPE 8–9, backdowns at 85–90% of top-set weight.
The Weekly Layout
| Day | Session |
|---|---|
| Day 1 (Monday) | Push (Chest, Shoulders, Triceps) |
| Day 2 (Tuesday) | Pull (Back, Biceps) |
| Day 3 (Wednesday) | Legs (Quad + Posterior Chain) |
| Day 4 (Thursday) | Upper Body |
| Day 5 (Friday) | Lower Body (Deadlift focus) |
| Day 6 | Rest |
| Day 7 | Rest |
Exact Exercise Selection
Day 1: Push
Chest, Shoulders, Triceps
| Exercise | Sets | Reps |
|---|---|---|
| Barbell Bench Press | 4–5 | 3–5 |
| Overhead Press | 3–4 | 3–5 |
| Incline Dumbbell Press | 3 | 6–12 |
| Dumbbell Lateral Raise | 4 | 15–20 |
| Cable Front Raise | 3 | 12–15 |
| Triceps Pushdown | 3 | 12–15 |
| Overhead Triceps Extension | 3 | 12–15 |
Day 2: Pull
Back, Biceps, Rear Delts
| Exercise | Sets | Reps |
|---|---|---|
| Weighted Pull-Up | 4–5 | 3–5 |
| Barbell Row | 3–4 | 3–5 |
| Seated Cable Row | 3 | 6–12 |
| Face Pull | 4 | 15–20 |
| Dumbbell or EZ-Bar Curl | 3–4 | 10–12 |
| Hammer Curl | 3 | 12 |
| Reverse Curl | 2 | 15 |
Day 3: Legs
Quad, Hamstring, Glute, Calf
| Exercise | Sets | Reps |
|---|---|---|
| Back Squat | 4–5 | 3–5 |
| Romanian Deadlift | 3–4 | 8–10 |
| Leg Press | 3 | 10–12 |
| Walking Lunge | 3 | 10 per leg |
| Leg Extension | 3 | 12–15 |
| Leg Curl | 3 | 12–15 |
| Calf Raise | 4 | 15–20 |
Day 4: Upper Body
Upper body variation + accessory
| Exercise | Sets | Reps |
|---|---|---|
| Incline Barbell or Dumbbell Press | 3–4 | 6–12 |
| Cable Row | 3–4 | 6–12 |
| Dumbbell Shoulder Press | 3 | 6–12 |
| Lat Pulldown (wide grip) | 3 | 6–12 |
| Pec Deck or Cable Fly | 3 | 12–15 |
| Barbell Curl | 3 | 10–12 |
| Dip or Close-Grip Bench | 3 | 8–12 |
Day 5: Lower Body
Deadlift + posterior chain
| Exercise | Sets | Reps |
|---|---|---|
| Conventional Deadlift | 4–5 | 3–5 |
| Bulgarian Split Squat | 3 | 8–10 per leg |
| Hip Thrust | 3–4 | 10–12 |
| Leg Curl | 3 | 12–15 |
| Leg Extension | 3 | 12–15 |
| Standing Calf Raise | 4 | 15–20 |
Progression Protocol
Block periodisation (Israetel/Juggernaut): Accumulation block (4 weeks, high volume, 65–75% 1RM) → Intensification block (4 weeks, moderate volume, 80–87.5% 1RM) → Realisation block (2 weeks, low volume, 90–95%+ 1RM) → Deload.
RPE-based autoregulation (Tuchscherer/RTS): target top sets at RPE 8 in accumulation, RPE 9 in intensification. If top set comes in at RPE 7, add weight. If RPE 9+, reduce next session.
Conjugate variation: rotate max effort exercises every 3–4 weeks to prevent accommodation. Never peak the same lift twice in a row.
Annual periodisation: plan 2–3 competition peaks per year if powerlifting, or two 12-week strength blocks with 4-week hypertrophy phases in between.
Common Mistakes at This Level
Running the same template too long. Advanced lifters are highly adapted — the same stimulus stops working faster. Block periodisation with deliberate variation every 4–6 weeks is mandatory.
Neglecting recovery metrics. At this level, overreaching doesn't feel dramatic — it accumulates silently. Tracking HRV, sleep quality, and readiness scores prevents weeks of diminished performance.
Chasing Instagram numbers, not relative strength. An advanced 80 kg lifter with a 200 kg squat is stronger relative to bodyweight than a 100 kg lifter squatting 210 kg. Total load is less relevant than strength-to-weight and lift progression.
Under-eating during accumulation phases. The volume required to drive adaptation at the advanced level demands genuine caloric support. Being lean year-round costs strength.
Avoiding weakness work. Most advanced lifters have a specific weakness (weak off the floor, poor lockout, bad position in the hole) they avoid. Those weaknesses define the ceiling of their progress.
How to Adjust Based on Recovery
Cora tracks your Heart Rate Variability (HRV) daily and compares it against your personal baseline. When your HRV is suppressed — a signal that your nervous system hasn't fully recovered — Cora's AI coach automatically modifies that day's session before you walk into the gym. Advanced lifters are simultaneously closest to their physical limits and most adapted to tolerating training stress — this makes overreaching harder to feel subjectively. HRV monitoring becomes critical here. Cora's algorithm tracks both morning HRV and within-session performance trends. When both trend downward simultaneously, it triggers a block-level adjustment: shorten the current intensification block by 1 week and insert a realisation phase earlier. This prevents accumulated fatigue from masking the strength gains that were building during the block.
Alternatives If You Have Less Time
If you only have 4 days per week: run the 4-day Upper / Lower Power variant. You'll reduce weekly volume per muscle by 20–25% but retain the key frequency stimulus. In practice, a well-designed 4-day program with high effort per session produces 85–90% of the results of a 5-day program.
Frequently Asked Questions
How long should I run this 5-day strength program before changing it?
Run it for at least 8–12 weeks before evaluating. Beginners can run the same template for 12–16 weeks due to the novelty effect. Intermediate lifters typically need to change the stimulus (rep ranges, exercises, or volume) every 4–6 weeks within a program while keeping the same split structure. The most common mistake is program-hopping every 3–4 weeks — you cannot assess effectiveness in under 8 weeks.
Can I do this 5-day split if I'm advanced?
This program is specifically designed for advanced lifters. Advanced programs require discipline in autoregulation — matching effort to readiness, not just following numbers. Use RPE as your primary guide.
What should I eat on training days vs rest days?
On training days, prioritise carbohydrates for intra-workout energy: 40–60g complex carbs 90 minutes before training, 30–40g fast carbs (banana, rice cake) within 30 minutes post-training. Protein timing matters less than total daily intake — hit 1.6–2.2 g/kg bodyweight across the day. Rest days can reduce carbohydrate intake by 20–30%, but never reduce protein.
How long should each session take?
45–65 minutes per session. Push and pull days are typically shorter (45–55 min); leg days run longer (60–70 min) due to the metabolic demand of heavy lower body work.
Should I do cardio on top of this program?
Minimal cardio recommended — 2 sessions per week of low-intensity steady-state (20–30 min walk, light cycle) maintains cardiovascular health without compromising strength recovery. Avoid high-intensity cardio; it competes with the same energy systems as heavy lifting.
How do I know when to add weight vs. stick at the same load?
For strength training, the rule is simple: if you completed all prescribed sets and reps at the current weight with good form and had 1–2 reps left in reserve on your last set, add weight next session. If you failed any reps or form broke down, repeat the weight. For intermediate lifters, this progression happens weekly or bi-weekly. For advanced lifters, progression is monthly and requires more sophisticated tools like RPE tracking.
Let Cora Adapt This Plan to Your Recovery
Static programs ignore your body’s readiness signals. Cora uses daily HRV data to automatically adjust your 5-day strength plan — heavier when you’re recovered, lighter when you need it.
Download Cora — Free on iOS